Raptor 1450 Hydraulic Excavator Thumb - 12 to 16 tonne

Product Code: Raptor-1450
£2,268.00 inc vat
£1,890.00 ex vat
£2,268.00
In Stock | See ordering information tab

Raptor 1450 Hydraulic Excavator Thumb - 12-16 Tonne

The 'Raptor' hydraulic excavator thumb grabs are available in a range of sizes, to suit 1 to 25 tonne excavators. They are designed to work in conjunction with standard attachments such as digging buckets, riddle buckets and land rakes and will not impede the normal digging operation of the excavator, as they can be easily folded away when not in use.

Each 'Raptor' model is derived from the latest American design, featuring a widened lower pivot joint and reinforced pin, which resists against uneven loads that are applied at the tip of the thumb.

Every hydraulic thumb undergoes a comprehensive manufacturing and quality control process, with all pivot joints line bored and bushed.

Photos are for illustration purposes only and depict the Raptor 800 model.

We are able to offer an on site fitting service (in Berkhamsted, Hertfordshire), for an additional cost. However, installation is relatively straightforward and most thumbs are therefore self installed by the customer. We advise that you refer to the Raptor 1450 technical drawing in the photos section, in order to ensure a suitable fit to your excavator.

Supplied as complete weld on kit, including the full length mounting plate, cylinder and thumb. Hoses are not included.

If you're fed up of not being able to grip or move awkward material with your bucket, then the Raptor thumb is your perfect companion!



Click on the interactive image above for specific details and benefits. Alternatively, please find other information below.

Specifications

Models available to suit 1.5 - 20 tonne excavators, with larger models available on request.

This page is for the JB excavator mounted hydraulic thumb - model Raptor 1450 to suit 12-16 tonne excavators


Raptor 1450 Features

  • Typical lead time (can vary): 2-3 days
  • Widened lower pivot pin
  • One solid weld on plate for easily installation and welding
  • Heavy duty cylinder with British, Hallite oil seals
  • Lower serrated edge for extra grip
  • Requires just one double acting auxiliary service
  • Line bored & fully grease-able pivot points
  • Supplied as complete weld on kit, including the full length mounting plate, cylinder and thumb


    Raptor 1450 Hydraulic Excavator Thumb - 12-16 Tonne

    The 'Raptor' hydraulic excavator thumb grabs are available in a range of sizes, to suit 1 to 25 tonne excavators. They are designed to work in conjunction with standard attachments such as digging buckets, riddle buckets and land rakes and will not impede the normal digging operation of the excavator, as they can be easily folded away when not in use.

    Each 'Raptor' model is derived from the latest American design, featuring a widened lower pivot joint and reinforced pin, which resists against uneven loads that are applied at the tip of the thumb.

    Every hydraulic thumb undergoes a comprehensive manufacturing and quality control process, with all pivot joints line bored and bushed.

    Photos are for illustration purposes only and depict the Raptor 800 model.

    We are able to offer an on site fitting service (in Berkhamsted, Hertfordshire), for an additional cost. However, installation is relatively straightforward and most thumbs are therefore self installed by the customer. We advise that you refer to the Raptor 1450 technical drawing in the photos section, in order to ensure a suitable fit to your excavator.

    Supplied as complete weld on kit, including the full length mounting plate, cylinder and thumb. Hoses are not included.

    If you're fed up of not being able to grip or move awkward material with your bucket, then the Raptor thumb is your perfect companion!



    Click on the interactive image above for specific details and benefits. Alternatively, please find other information below.

    ×

    Models available to suit 1.5 - 20 tonne excavators, with larger models available on request.

    This page is for the JB excavator mounted hydraulic thumb - model Raptor 1450 to suit 12-16 tonne excavators


    ×

    • Typical lead time (can vary): 2-3 days
    • Widened lower pivot pin
    • One solid weld on plate for easily installation and welding
    • Heavy duty cylinder with British, Hallite oil seals
    • Lower serrated edge for extra grip
    • Requires just one double acting auxiliary service
    • Line bored & fully grease-able pivot points
    • Supplied as complete weld on kit, including the full length mounting plate, cylinder and thumb


      More Related Products

      View all
      1.2 to 2 tonne
      2 to 4 tonne
      Raptor 800 Hydraulic Excavator Thumb - 2 to 4 tonne
      £942.00 inc vat
      £785.00 ex vat
      4 to 6 tonne
      Raptor 900 Hydraulic Excavator Thumb - 4 to 6 tonne
      £1,068.00 inc vat
      £890.00 ex vat
      7 to 10 tonne
      Raptor 1150 Hydraulic Excavator Thumb - 7 to 10 tonne
      £1,302.00 inc vat
      £1,085.00 ex vat
      Left Continue shopping
      Your Order

      You have no items in your cart