SG4 Fixed 2-Way Excavator Selector Grab - 4-6 Tonne

Product Code: SG4
£3,228.00 inc vat
£2,690.00 ex vat
£3,228.00
In Stock | See ordering information tab

4-6 Tonne Excavator Fixed Hydraulic Selector Grab

Not the model you're after? View all Grabs & Grapples

The JB equipment SG4 selector grab is a hydraulic grab best suited to excavators from 4 to 6 tonne such a JCB 3CX (backhoe) or Volvo EC55. It is a heavy duty attachment commonly used in varying applications such as demolition, waste handling and general sorting.

This is a non-rotating grab and runs simply off the excavators double acting hydraulic hammer circuit. Unlike rotating grabs it does not require a second hydraulic service which helps reduce the comparative cost.

A quick hitch cross link is supplied as standard and enables the grab can be used in either orientation.

The SG grabs are a cost effective range that enables the full dexterity of the machine to be utilised without any need for welding parts to the excavator. Fully greaseable pivot points and bolt on replaceable wear blades allow for a long service life.

Please Note: This attachment is not supplied with hoses as standard. These can be ordered separately by visiting our Hydraulic Hoses & Couplers product pages.


 

Click on the interactive image above for specific details and benefits. Alternatively, please find other information below.

Specifications

Models available to suit 4 - 20 tonne excavators, with larger models available on request.

This page is for the JB Fixed 2-Way Selector Grab - model SG4 to suit 4-6 tonne excavators

 

SG4 Features

  • Typical lead time (can vary): 2-3 days
  • Line bored & fully grease-able pivot points
  • Pressure relief and check valves installed
  • Standard 2-way crosslink included (assuming applicable excavator)
  • Interchangeable bolt on wear edges

 

4-6 Tonne Excavator Fixed Hydraulic Selector Grab

Not the model you're after? View all Grabs & Grapples

The JB equipment SG4 selector grab is a hydraulic grab best suited to excavators from 4 to 6 tonne such a JCB 3CX (backhoe) or Volvo EC55. It is a heavy duty attachment commonly used in varying applications such as demolition, waste handling and general sorting.

This is a non-rotating grab and runs simply off the excavators double acting hydraulic hammer circuit. Unlike rotating grabs it does not require a second hydraulic service which helps reduce the comparative cost.

A quick hitch cross link is supplied as standard and enables the grab can be used in either orientation.

The SG grabs are a cost effective range that enables the full dexterity of the machine to be utilised without any need for welding parts to the excavator. Fully greaseable pivot points and bolt on replaceable wear blades allow for a long service life.

Please Note: This attachment is not supplied with hoses as standard. These can be ordered separately by visiting our Hydraulic Hoses & Couplers product pages.


 

Click on the interactive image above for specific details and benefits. Alternatively, please find other information below.

×

Models available to suit 4 - 20 tonne excavators, with larger models available on request.

This page is for the JB Fixed 2-Way Selector Grab - model SG4 to suit 4-6 tonne excavators

 

×

  • Typical lead time (can vary): 2-3 days
  • Line bored & fully grease-able pivot points
  • Pressure relief and check valves installed
  • Standard 2-way crosslink included (assuming applicable excavator)
  • Interchangeable bolt on wear edges

 

More Related Products

View all
SG1 Fixed 2-Way Excavator Selector Grab - 0.8-2 Tonne
£1,428.00 inc vat
£1,190.00 ex vat
SG2 Fixed 2-Way Excavator Selector Grab - 2-3 Tonne
£1,908.00 inc vat
£1,590.00 ex vat
SG3 Fixed 2-Way Excavator Selector Grab - 2.5-5 Tonne
£2,268.00 inc vat
£1,890.00 ex vat
Best Seller
SG6 Fixed 2-Way Excavator Selector Grab - 6-10 Tonne
£3,828.00 inc vat
£3,190.00 ex vat
Left Continue shopping
Your Order

You have no items in your cart