Excavator Attachment Headstock / Cradle - 40mm Pin

Product Code: HS-WP40-N
£306.00 inc vat
£255.00 ex vat
£306.00
In Stock | See ordering information tab

40mm Pin Diameter Excavator Attachment Headstock

This is typically a 3.5 - 6 Tonne Excavator Headstock - manufactured with a 40mm diameter.

Please see the information below, with details as to how to order above:

Enter Your Excavator's Make & Model
Let us know your excavator's make & model - a member of our sales team will contact you to verify the pin diameter, pin width and pin centres.

Pin Type - This refers to how the pins are mounted into the headstock.
You can choose from 2 options:
  1. Welded - Choose welded pins if you have a suitable spring, ratchet type or hydraulic quick hitch on your excavator.
  2. Removeable - Choose removeable pins if you do not have a quick hitch or would like the ability to remove them. These are sometimes referred to as dummy pins.

Please note: Welded pin configurations are cheaper and less prone to wear.

** NOTICE ** Due to manufacturing capacity constraints, we are currently only able to supply headstocks to fit JB Equipment branded products.

Bolt Hole Pattern
You can choose from 3 different options:

  1. None - No holes will cut cut, allowing you to drill your own or simply weld the headstock onto your desired equipment.
  2. Standard - The headstock will be supplied with a series of bolt holes in based on the excavator information you provide. These will not align and fit onto your existing attachment's holes, but would give you a template to create a new fixing point.
  3. Customer Defined - Choose this option if you want the headstock to fit straight onto your attachment, such as the top of hydraulic breaker. You will need to provide us with detailed measurements, so please Contact Us before or after ordering and our team will advise how to do this.

Headstock T&C's

  • Due to the customised nature of this product, lead times can vary.
  • We reserve the right to cancel an order upon receipt of information that may affect the complexity of the design and fabrication.
  • Photo's shown are for illustrative purposes only, your product may vary.
  • Headstocks are painted in black as standard. Other colours available on request and will incur an additional charge.

    40mm Pin Diameter Excavator Attachment Headstock

    This is typically a 3.5 - 6 Tonne Excavator Headstock - manufactured with a 40mm diameter.

    Please see the information below, with details as to how to order above:

    Enter Your Excavator's Make & Model
    Let us know your excavator's make & model - a member of our sales team will contact you to verify the pin diameter, pin width and pin centres.

    Pin Type - This refers to how the pins are mounted into the headstock.
    You can choose from 2 options:
    1. Welded - Choose welded pins if you have a suitable spring, ratchet type or hydraulic quick hitch on your excavator.
    2. Removeable - Choose removeable pins if you do not have a quick hitch or would like the ability to remove them. These are sometimes referred to as dummy pins.

    Please note: Welded pin configurations are cheaper and less prone to wear.

    ** NOTICE ** Due to manufacturing capacity constraints, we are currently only able to supply headstocks to fit JB Equipment branded products.

    Bolt Hole Pattern
    You can choose from 3 different options:

    1. None - No holes will cut cut, allowing you to drill your own or simply weld the headstock onto your desired equipment.
    2. Standard - The headstock will be supplied with a series of bolt holes in based on the excavator information you provide. These will not align and fit onto your existing attachment's holes, but would give you a template to create a new fixing point.
    3. Customer Defined - Choose this option if you want the headstock to fit straight onto your attachment, such as the top of hydraulic breaker. You will need to provide us with detailed measurements, so please Contact Us before or after ordering and our team will advise how to do this.
    ×

    • Due to the customised nature of this product, lead times can vary.
    • We reserve the right to cancel an order upon receipt of information that may affect the complexity of the design and fabrication.
    • Photo's shown are for illustrative purposes only, your product may vary.
    • Headstocks are painted in black as standard. Other colours available on request and will incur an additional charge.

      More Related Products

      View all
      25mm Pin Diameter
      Excavator Attachment Headstock / Cradle - 25mm Pin
      From
      £210.00 inc vat
      £175.00 ex vat
      30mm Pin Diameter
      Excavator Attachment Headstock / Cradle - 30mm Pin
      From
      £234.00 inc vat
      £195.00 ex vat
      32mm Pin Diameter
      Excavator Attachment Headstock / Cradle - 32mm Pin
      From
      £234.00 inc vat
      £195.00 ex vat
      35mm Pin Diameter
      Excavator Attachment Headstock / Cradle - 35mm Pin
      From
      £270.00 inc vat
      £225.00 ex vat
      Left Continue shopping
      Your Order

      You have no items in your cart