C4 Excavator Mulching Head - FL100-130 - 6 to 16 Tonne Excavator

Product Code: FL100
£9,228.00 inc vat
£7,690.00 ex vat
£9,228.00
In Stock | See ordering information tab

C4 Excavator Mulching Head - 6 to 16 tonne

Not the size you're after? Click Here to view all models...

Manufactured by C4 Meccaninca Srl. in Italy, since 1973. With such extensive industry knowledge, these excavator flail and mulcher heads are of the highest quality - designed for professional users.

The FL130 excavator mulching head is fitted with Hammer blades as standard

Forestry mulcher heads, flail heads for mini-excavators, mulcher heads for skid steers and even earth drills and mixing buckets for excavators and telehandlers, are all manufactured in house using the finest European components. Thanks to leading edge machinery, a highly qualified work force and outstanding manufacturing procedures, C4 Meccanica is one of the finest European producers of excavator flail heads.

C4 Excavator Flail Heads
100% Made in Italy
Anti-cavitation flow adjustment valve included
 Heavy Duty - Typically 20% stronger & heavier than other brands
Excavator headstock included
Fitted with Cassapa hydraulic motor
 Hydraulic hoses included (not quick couplings)
UK stock
 

The FL100, 130 & 160 excavator mulcher heads will fit a wide range of excavators between 6 and 16 tonnes, that have a minimum oil flow of 60 l/min.

The video below is an FL130 flail mulching head fitted on a Kubota KX080-4. Larger excavators will provide an increased l/min oil flow capacity, which will therefore offer an even better performance out of the FL100-160 models.

 

All C4 excavator flails are fitted with the highest quality Casappa hydraulic motors.

Although an additional case drain line is not specifically required, the back pressure in the excavators return line must not exceed 10 bar of pressure if used without one. This can usually be achieved on most excavators, particularly if there is a free flow return to tank option on the excavator dashboard. However, for best performance and motor seal longevity, a case drain line is advised. 

Specifications

Models available to suit 1.5 - 20 tonne excavators, with larger models available on request.

This page is for the mini excavator flail head - model FL100-160 to suit 6-16 tonne excavators

 

FL100-160 Features

  • Typical lead time from UK stock (can vary): 2-3 days
  • Includes 2 pin excavator headstock
  • Flotation device fitted as standard
  • Heavy duty reinforced frame construction
  • Cassapa hydraulic motor
  • CE marked
  • Anti cavitation flow adjustment valve included
  • General purpose flails fitted
  • Made in Italy 

C4 Excavator Mulching Head - 6 to 16 tonne

Not the size you're after? Click Here to view all models...

Manufactured by C4 Meccaninca Srl. in Italy, since 1973. With such extensive industry knowledge, these excavator flail and mulcher heads are of the highest quality - designed for professional users.

The FL130 excavator mulching head is fitted with Hammer blades as standard

Forestry mulcher heads, flail heads for mini-excavators, mulcher heads for skid steers and even earth drills and mixing buckets for excavators and telehandlers, are all manufactured in house using the finest European components. Thanks to leading edge machinery, a highly qualified work force and outstanding manufacturing procedures, C4 Meccanica is one of the finest European producers of excavator flail heads.

C4 Excavator Flail Heads
100% Made in Italy
Anti-cavitation flow adjustment valve included
 Heavy Duty - Typically 20% stronger & heavier than other brands
Excavator headstock included
Fitted with Cassapa hydraulic motor
 Hydraulic hoses included (not quick couplings)
UK stock
 

The FL100, 130 & 160 excavator mulcher heads will fit a wide range of excavators between 6 and 16 tonnes, that have a minimum oil flow of 60 l/min.

The video below is an FL130 flail mulching head fitted on a Kubota KX080-4. Larger excavators will provide an increased l/min oil flow capacity, which will therefore offer an even better performance out of the FL100-160 models.

 

All C4 excavator flails are fitted with the highest quality Casappa hydraulic motors.

Although an additional case drain line is not specifically required, the back pressure in the excavators return line must not exceed 10 bar of pressure if used without one. This can usually be achieved on most excavators, particularly if there is a free flow return to tank option on the excavator dashboard. However, for best performance and motor seal longevity, a case drain line is advised. 

×

Models available to suit 1.5 - 20 tonne excavators, with larger models available on request.

This page is for the mini excavator flail head - model FL100-160 to suit 6-16 tonne excavators

 

×

  • Typical lead time from UK stock (can vary): 2-3 days
  • Includes 2 pin excavator headstock
  • Flotation device fitted as standard
  • Heavy duty reinforced frame construction
  • Cassapa hydraulic motor
  • CE marked
  • Anti cavitation flow adjustment valve included
  • General purpose flails fitted
  • Made in Italy 

More Related Products

View all
1 to 3 tonne
2 to 5 tonne
3 to 6 tonne
5 to 10 tonne
Left Continue shopping
Your Order

You have no items in your cart