SG18 Fixed 2-Way Excavator Selector Grab - 18-28 Tonne

Product Code: SG18
£7,068.00 inc vat
£5,890.00 ex vat
£7,068.00
In Stock | See ordering information tab

18-28 Tonne Excavator Fixed Hydraulic Selector Grab

Not the model you're after? Click Here to view all grabs & grapples...

The JB equipment SG18 selector grab is the largest in the SG series and engineered to fit excavators from 18 to 28 tonne such as a JCB, CAT, Hyundai or Doosan DX220. It is a heavy duty attachment commonly used in varying applications such as demolition, waste handling and general sorting.

This grab is equipped with two heavy duty hydraulic cylinders.

This is a non-rotating grab and runs simply off the excavators double acting hydraulic hammer circuit. Unlike rotating grabs it does not require a second hydraulic service which helps reduce the comparative cost.

A quick hitch cross link is supplied as standard and enables the grab can be used in either orientation.

The SG grabs are a cost effective range that enables the full dexterity of the machine to be utilised without any need for welding parts to the excavator. Fully greaseable pivot points and bolt on replaceable wear blades allow for a long service life.

Please note: As standard this attachment is not supplied with hoses. Although we generally advise to have these made once fitted to the machine in order to gauge an accurate length, these can be ordered by visiting our Hydraulic Hoses & Couplers webpage. When ordering hoses to accompany an attachment, our team will ensure all hoses are supplied in the appropriate size and with all necessary fittings to fit the attachment (and couplers if applicable). You will need to determine the hose length and size of couplers that you require.


Click on the interactive image above for specific details and benefits. Alternatively, please find other information below.

Specifications

Models available to suit 0.8 - 28 tonne excavators, with larger models available on request.

This page is for the JB Fixed 2-Way Selector Grab - model SG18 to suit 18-28 tonne excavators

SG18 Features

  • Typical lead time (can vary): 2-3 days
  • Line bored & fully grease-able pivot points
  • Pressure relief and check valves installed
  • Standard 2-way crosslink included (assuming applicable excavator)
  • Interchangeable bolt on wear edges

    18-28 Tonne Excavator Fixed Hydraulic Selector Grab

    Not the model you're after? Click Here to view all grabs & grapples...

    The JB equipment SG18 selector grab is the largest in the SG series and engineered to fit excavators from 18 to 28 tonne such as a JCB, CAT, Hyundai or Doosan DX220. It is a heavy duty attachment commonly used in varying applications such as demolition, waste handling and general sorting.

    This grab is equipped with two heavy duty hydraulic cylinders.

    This is a non-rotating grab and runs simply off the excavators double acting hydraulic hammer circuit. Unlike rotating grabs it does not require a second hydraulic service which helps reduce the comparative cost.

    A quick hitch cross link is supplied as standard and enables the grab can be used in either orientation.

    The SG grabs are a cost effective range that enables the full dexterity of the machine to be utilised without any need for welding parts to the excavator. Fully greaseable pivot points and bolt on replaceable wear blades allow for a long service life.

    Please note: As standard this attachment is not supplied with hoses. Although we generally advise to have these made once fitted to the machine in order to gauge an accurate length, these can be ordered by visiting our Hydraulic Hoses & Couplers webpage. When ordering hoses to accompany an attachment, our team will ensure all hoses are supplied in the appropriate size and with all necessary fittings to fit the attachment (and couplers if applicable). You will need to determine the hose length and size of couplers that you require.


    Click on the interactive image above for specific details and benefits. Alternatively, please find other information below.

    ×

    Models available to suit 0.8 - 28 tonne excavators, with larger models available on request.

    This page is for the JB Fixed 2-Way Selector Grab - model SG18 to suit 18-28 tonne excavators

    ×

    • Typical lead time (can vary): 2-3 days
    • Line bored & fully grease-able pivot points
    • Pressure relief and check valves installed
    • Standard 2-way crosslink included (assuming applicable excavator)
    • Interchangeable bolt on wear edges

      More Related Products

      View all
      SG1 Fixed 2-Way Excavator Selector Grab - 0.8-2 Tonne
      £1,428.00 inc vat
      £1,190.00 ex vat
      SG2 Fixed 2-Way Excavator Selector Grab - 2-3 Tonne
      £1,908.00 inc vat
      £1,590.00 ex vat
      SG3 Fixed 2-Way Excavator Selector Grab - 2.5-5 Tonne
      £2,268.00 inc vat
      £1,890.00 ex vat
      SG4 Fixed 2-Way Excavator Selector Grab - 4-6 Tonne
      £3,228.00 inc vat
      £2,690.00 ex vat
      Left Continue shopping
      Your Order

      You have no items in your cart